Other Live Audio Sources

Live Scanners

Police and Fire Feeds

For state-specific online feeds, please see the desired state in our Collaboration Gateway. The following sites list feeds from multiple states or regions.

Railroad Feeds

Aircraft Feeds

  

Live Tunable Receivers

 We have a RR forum dedicated to this topic here . Also see the WebReceivers Yahoo group for additional information. If the site hosts multiple receivers, please only list the site and not the individual receivers. This forces the website to maintain its own list of active receivers and reduces maintenance on this end.

Global Online Receivers

   

Online amateur radio

This article is devoted to those services that allow a user to connect to an amateur radio station over the Net. It's legal to listen without a license, but one is required to transmit. In some cases, a system may be closed - that is open to members that pay a fee, and supply a copy of the appropriate license.

 

Contents

 [hide]

AllStar

IRLP (Internet Radio Linking Project)

Echolink

  

Other Amateur Radio Audio Feeds and Websites

VHF/UHF

Specialized Feeds

HF

 

World Wide Audio Feeds

 
 
 
 
 
 

Teamspeak


Teamspeak Connection to IncidentBroadCast.Com

Teamspeak is a software application that allows you to use voice communications to talk to others on the Internet. Since RR users typically will be using Teamspeak to listen to scanner audio feeds, this document does not describe how to set up your transmit audio. This document assumes that the computer you are installing Teamspeak on already has working audio.

NOTE: There are many many Teamspeak servers out there providing scanner audio feeds, some of which can be found in the Live Scanners article. For the sake of this tutorial, we will use a fictitious Teamspeak server called RR Teamspeak with the IP address of 192.168.1.100, port 8767. We will use the nickname someRRuser. You will need to use different values for the Teamspeak server that you want to connect to.

 Download Teamspeak

Primary Download Site

TS Win32 Client

TS Linux Client

TS Mac OS/X Client

Install Teamspeak

Start Teamspeak

Configure New Teamspeak Server

  • Click on Connections, then select Connect


Ts1.jpg

 

  • Right-Click on Servers, then select Add Server


Ts2.jpg

 

  • Give the new server a friendly name (example only: RR Teamspeak) and press <Enter>


Ts3.jpg

 

  • Fill out the details for that new server


The values you enter on the righthand side will vary depending upon the Teamspeak server you are connecting to.


Label: RR Teamspeak

The label should be a 'short' friendly name that you want it to show up as on the left


Server Address: 192.168.1.100:8767

8767 is the default port. If the server you want to connect to has a port of 8767, you can omit the : and everything after it. However, since many Teamspeak servers run on odd ports, it is better to always include the port as well. If a server doesn't list a port, then it is using the default port 8767.

Also, you may see a hostname in place of the IP address, example only: rrts.radioference.com:8768


Nickname: someRRuser

The nickname should be something descriptive of you, perhaps your RR name, perhaps something else. Or, make it something totally obscure. Whatever you wish.


Select Anonymous


Ts4.jpg

 

  • Click Connect to connect to the server


If all goes well, you should be logged into the Teamspeak server and hear "Link Engaged." You should see something vaguely similar to what you see below.


Ts5.jpg

 

Register With Server

Most Teamspeak servers require that you register with the server before you are able to access its channel contents. During this process you will be prompted for Login Name and a Password. Just make up something for each, but remember what they are because you will have to enter them in your configuration later.

  • Click on Self, then Register With Server


Ts6.jpg


Ts7.jpg

 

  • Make up a Login Name and Password and enter those in (password twice)

When finished, you will hear "Registration Complete" and should see the following at the bottom of your Teamspeak window:


Ts8.jpg

 

Edit Your Teamspeak Config (now that you are registered)

  • Select Connect, then select Disconnect. You should hear "Link Disengaged."


Ts9.jpg

 

  • Then, click on Connection, and then select Connect

Highlight the new entry you just created, and then edit the information on the right-hand side

 

  • Select Registered instead of Anonymous

Login Name: Enter in the Login Name that you used when you Registered With Server

User Password: Enter in the Password that you used when you Registered With Servers


Ts10.jpg

 

Connect To Server (to verify config and have fun)

Click Connect

You should hear "Link Engaged." You should also see an (R) to the rightside of your name as shown below:


Ts11.jpg


If you've made it to this point, you are ready to enjoy listening to audio on the new Teamspeak server that you registered on. You might even want to go find some other Teamspeak servers to connect to. Many are mentioned in this thread in the RR Forums.

If you run into problems, you may want to ask for help in that forum or at GoTeamspeak
 
 
 
 
 
 
tversity
 
 
 
 
 
 
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk